Upgrade the weak link in your 2011-2019 Ford 6.7L Powerstroke valvetrain with the XDP Pushrods 3/8 inch Street Performance XD322. At almost 10 inch long, the stock 5/16 inch pushrods in your 6.7L Powerstroke are not adequate for a modified engine.
Increases in valve spring pressures, engine RPM and cylinder pressures can quickly stress your pushrods and push past their physical limits. This causes flex that leads to valvetrain damage and power loss. This flex is not visible to the naked eye and when inspecting the factory pushrods, they normally won't show signs of wear or failure.
This does not mean they shouldn't be replaced. Eliminate the weak point and upgrade your pushrods today!
Manufactured in the USA to XDP's stringent standards, the XD322 Pushrods are handcrafted by experts using only the highest quality materials. The 3/8 inch Street Performance Pushrods are manufactured from a seamless 4130/4135 chromoly tubing that is cold drawn over a mandrel for maximum rigidity and strength.
The CNC machined tips are made from a 86L20 bar stock that is core hardened and triple tempered for increased impact and wear resistance. The extra steps in the manufacturing process gives you a stronger and more reliable pushrod that allows you to maximize your valvetrain performance.
Sold as a set of 32.
- Supports 800HP
- 170,000 PSI Tensile Strength
- 4130/4135 Chromoly Construction
- 3/8 inch x .095 inch, 9.548 inch Overall Length
- Made in the USA!
These Pushrods are a direct replacement for the factory pushrods in your engine.
Please consult the factory service manual for removal, installation and valve adjustment instructions.